8" SCH120 SMLS STEEL PIPE AS PER API 5L PSL1 X52 WITH EXTERNAL 3LPE COATING AS PER DIN30670
Key Specifications / Features
Model no.: HX- 3LPE COATED PIPE-29 Hits: 9
China manufacturer of 8" SCH120SMLS STEEL PIPE AS PER API 5L PSL1 X52 WITH EXTERNAL 3LPE COATING AS PER DIN30670
Request a quote
share
Tags
Detail Information
Standard: API 5L-2009 ISO 3183-2007 DIN 30670 ( Coating)
Steel Grades: Gr. B X42 X46 X52 X56 X60 X65 X70 L245 L290 L320 L360 L390 L415 L450 L480
Size Range: OD:1/2” TO 36”. WT: 3mm To 45mm
Coating Thickness: 2mm- 5mm
Manufacturing Process : Hot Rolled / ERW /LSAW
Application:The external coating is mainly used for anti-corrosion protection for liquid pipes before burying.Such pipes has been widely used in rugged environment
Packing: External Black Painting ,Both Side With End Caps, In Bundles by Steel Strips,Covered by Waterproof.
Steel Grades: Gr. B X42 X46 X52 X56 X60 X65 X70 L245 L290 L320 L360 L390 L415 L450 L480
Size Range: OD:1/2” TO 36”. WT: 3mm To 45mm
Coating Thickness: 2mm- 5mm
Manufacturing Process : Hot Rolled / ERW /LSAW
Application:The external coating is mainly used for anti-corrosion protection for liquid pipes before burying.Such pipes has been widely used in rugged environment
Packing: External Black Painting ,Both Side With End Caps, In Bundles by Steel Strips,Covered by Waterproof.
Nominal Size of Pipe | Minimum Thickness of Normal(n)Coating ,in mm |
Up to DN100 | 1.8 |
Over DN100 up to DN250 | 2.0 |
Over DN250 to Below DN500 | 2.2 |
From DN500 to Below DN800 | 2.5 |
From DN800 | 3.0 |
The minimum coating thickness shall be 0.7mm greater (reinforced(v)type)where coatings will be subjected to particularly high mechanical stress. Along any 1m length of pipe,the coating thickness maybe up to 10% less than the minimum required,provded the thinner area does not cover more than 5cm2 |
|
Steel grade | Delivery condition |
BNS(L245NS) | Normalizing rolled, normalizing formed, normalized, normalized and tempered |
X42NS(L290NS) | Normalizing rolled, normalizing formed, normalized, normalized and tempered |
X46NS(L320NS) | Normalizing rolled, normalizing formed, normalized, normalized and tempered |
X52NS(L360NS) | Normalizing rolled, normalizing formed, normalized, normalized and tempered |
BQS(L245QS) | Quenched and tempered |
X42QS(L290QS) | Quenched and tempered |
X46QS(L320QS) | Quenched and tempered |
X52QS(L360QS) | Quenched and tempered |
X56QS(L390QS) | Quenched and tempered |
X60QS(L415QS) | Quenched and tempered |
Steel Grade | Strtch Performance | Impact energy(J) |
Hardness | ||||
Yield strength | Tensile strength | Elongation | |||||
Mpa | Mpa | % | Min | Max | |||
Min | Max | Min | Max | ||||
BNS(L245NS) BQS(L245QS) | 245 | 450 | 415 | 760 | As per standard |
27 | 22HRC OR 250HV10 |
X42NS(L290NS) X42Q(L290QS) | 290 | 495 | 415 | 760 | 27 | ||
X46NS(L320NS) X46Q(L320QS) | 320 | 525 | 435 | 760 | 27 | ||
X52NS(L360NS) X52Q(L360QS) | 360 | 530 | 460 | 760 | 27 | ||
X56QS(L390QS) | 390 | 545 | 490 | 760 | 27 | ||
X60QS(L415QS) | 450 | 600 | 520 | 760 | 27 |
Comment Form