High Quality ASTM A 213 16.5MM OD Plain End Seamless Stainless Steel Pipes STD
Key Specifications / Features
Model no.: HX-Stainless Steel Pipes-294 Hits: 1
China manufacturer of High Quality ASTM A 213 16.5MM OD Plain End Seamless Stainless Steel Pipes STD
Request a quote
share
Tags
Detail Information
Standard&material: ASTM A213 T5,T9,T11,T12,T22 and equivalent standard&material like ASTM A335 P5,P9,P11,P12,P22 etc.
Size range: 12.7mm*1.2mm-168mm*18mm
Manufacture method: Cold rolled, cold drawn, hydraulic cold drawn
Delivery condition: Normalized+tempered.
Packing: In bundles tied with steel strips. Oil coating, end plastic caps.
End finish: plain ends with square cuts.
Size tolerance: as per ASTM A450
Which is widely used in Steel Boiler,Superheater, and Heat-Exchanger etc high pressure & temperature environment.
Size range: 12.7mm*1.2mm-168mm*18mm
Manufacture method: Cold rolled, cold drawn, hydraulic cold drawn
Delivery condition: Normalized+tempered.
Packing: In bundles tied with steel strips. Oil coating, end plastic caps.
End finish: plain ends with square cuts.
Size tolerance: as per ASTM A450
Which is widely used in Steel Boiler,Superheater, and Heat-Exchanger etc high pressure & temperature environment.
Standard | Grade | Chemical Composition (%) | Mechanical Properties | ||||||||
C | Mn | P | S | Si | Cr | Mo | Tensil Strength Mpa min |
Yield Strength Mpa min |
Elongation % min |
||
A213 | T5 | 0.15 max | 0.30–0.60 | 0.025 max | 0.025 max | 0.5 max | 4.00–6.00 | 0.45–0.65 | 415 | 205 | 30 |
T9 | 0.15 max | 0.30–0.60 | 0.025 max | 0.025 max | 0.25–1.00 | 8.00–10.00 | 0.90–1.10 | 415 | 205 | 30 | |
T11 | 0.05–0.15 | 0.30–0.60 | 0.025 max | 0.025 max | 0.50–1.00 | 1.00–1.50 | 0.44–0.65 | 415 | 205 | 30 | |
T12 | 0.05–0.15 | 0.30–0.61 | 0.025 max | 0.025 max | 0.5 max | 0.80–1.25 | 0.44–0.65 | 415 | 220 | 30 | |
T22 | 0.05–0.15 | 0.30–0.60 | 0.025 max | 0.025 max | 0.5 max | 1.90–2.60 | 0.87–1.13 | 415 | 205 | 30 |
Comment Form