Stainless Steel Pipe ASTM 213 Stainless Steel Seamless Round Pipe 8’’ SCH60

Key Specifications / Features

Model no.: HX-Stainless Steel PIPE-306 Hits: 1

Stainless Steel Pipe ASTM 213 Stainless Steel Seamless Round Pipe 10’’ SCH60

Request a quote share

Detail Information

Standard&material: ASTM A213 T5,T9,T11,T12,T22 and equivalent standard&material like ASTM A335 P5,P9,P11,P12,P22 etc.
Size range: 12.7mm*1.2mm-168mm*18mm
Manufacture method: Cold rolled, cold drawn, hydraulic cold drawn
Delivery condition: Normalized+tempered.
Packing: In bundles tied with steel strips. Oil coating, end plastic caps.
End finish: plain ends with square cuts.
Size tolerance: as per ASTM A450
Which is widely used in Steel Boiler,Superheater, and Heat-Exchanger etc high pressure & temperature environment.

Grade	Chemical Composition (%)								Mechanical Properties
Grade	C	Mn	P	S	Si	Cr	Ni	Mo	Tensile Strength Mpa min	Yield Strength Mpa min	Elongation %
TP304	0.08	2.0	0.045	0.03	0.75	18.0-20.0	8.0-11.0	/	≥515	≥205	≥35
TP304L	0.035	2.0	0.045	0.03	0.75	18.0-20.0	8.0-13.0	/	≥485	≥170	≥35
TP304H	0.04-0.10	2.0	0.045	0.03	0.75	18.0-20.0	8.0-11.0	/	≥515	≥205	≥35
TP316	0.08	2.0	0.045	0.03	0.75	16.0-18.0	11.0-14.0	2.00-3.00	≥515	≥205	≥35
TP316L	0.035	2.0	0.045	0.03	0.75	16.0-18.0	10.0-14.0	2.00-3.00	≥485	≥170	≥35
TP316H	0.04-0.10	2.0	0.045	0.03	0.75	16.0-18.0	11.0-14.0	2.00-3.00	≥515	≥205	≥35
TP321	0.08	2.0	0.045	0.03	0.75	17.0-19.0	9.0-12.0	/	≥515	≥205	≥35
TP347	0.08	2.0	0.04	0.03	0.75	17.0-20.0	9.0-13.0	/	≥515	≥205	≥35
TP347H	0.04-0.10	2.0	0.04	0.03	0.75	17.0-20.0	9.0-13.0	/	≥515	≥205	≥35